Desk role
LinkScope Sourcing 37 writes the brief before any plant is asked
LinkScope Sourcing 37 is an independent sourcing partner. The work is to turn a connector drawing into a comparable request, send that request to plants that quote the mechanical family, and line up the replies. The desk is not the manufacturer of the shell and does not hold a warehouse position.
What the desk does with a connector file
-
Restate the mechanical facts
Shell style, coding, contact count, termination, plating and ingress protection code are copied from the buyer file. Missing facts stay marked unknown. A similar photo is not used to fill a cutout or a contact size.
-
Separate commercial scope
Quantity, currency, per-piece or whole-order budget, destination and requested timing sit beside the mechanical cells. Freight, duties and tooling are asked as their own answers so the unit price has a boundary.
-
Ask for model-bound files
After a plant names a model, the desk asks for the datasheet, drawing revision and the test note that matches that model. ISO 9001 language, when a plant offers it, is read as a quality-system statement about that supplier, not as a property of this desk.
-
Hand the comparison back
The buyer sees deviations, exclusions and open cells. Acceptance of a mate, a torque value or a safety file remains with the buyer and the plant. The desk does not convert an unverified sentence into a published performance claim.
There is no published founding year, headcount or audited plant list on this site, because those facts are not part of the sourcing file used to build the desk. Communication happens through the RFQ form and the work email you submit. The page does not state a reply clock.
If a cable question appears, insertion loss and return loss are parked in a cable note. A worked file might show 5 conductors, 0.5 A signal contacts, 24 V, 100 mating cycles, IP65 unmated and a 1.27 mm pitch. Those values are examples of what to copy, and they are used when the drawing prints them. Channel width and MIMO describe radios. They are not filled in for a passive circular shell. Calibration traceability is the name of the lab and the date on the plant sheet, such as a 2024-05-12 report, when the plant actually supplies that date. The connector comparison stays on contacts, coding, sealing and price scope. Impedance is included when the buyer says the pair is a controlled signal and names the cable.
Boundaries a buyer can check
Who speaks for a rating?
Current in amperes, voltage in volts, mating cycles and an ingress protection code are plant statements about a named part. The desk can ask for the test basis. It does not retest the part and does not sign the datasheet.
Who chooses the plant preference?
High-end, mid-range, budget or undecided is written by the buyer. It signals how much drawing detail and commercial flexibility you want to compare. It is not a grade the desk has awarded, and it does not require a live price to be meaningful.
What happens when two replies use different names for one shell?
The pin map, coding groove and termination are compared, not the marketing family name. If those three diverge, the replies stay in separate columns instead of being averaged.
Where do standards sit?
A cabling overview such as the TIA-568 public page can suggest questions about category, shield and polarity for the attached cable. It is not a substitute for the current standard text and it does not certify a circular connector. Equipment-authorization questions are sent to the plant for the exact model when the installation needs them.
Ask the desk to review a file
Put the drawing facts in the requirement box. The review checks whether the brief is comparable. It is not a mechanical approval.